Description
Visco Vision Gel
Description
hypotonic and viscous wetting gel with 0.2% Carbomer 980. Visco-Vision Gel shows excellent mucoadhesive properties. Thanks to its wetting effect, it acts uniformly on the surface of the cornea and conjunctiva ensuring beneficial and prolonged hydration of the eye.
It can be used for the following indications:
-dry eyes caused by Sjögren's syndrome;
-mechanical stress, e.g. following diagnostic procedures on the eye;
-environmental stress, e.g. due to air-conditioned rooms, wind, cold, dry air or air containing harmful substances, such as cigarette smoke;
-tiredness and visual stress due to intense use of the eyes, e.g. from computer or microscope work or long periods of driving.
How to use
Before using Visco-Vision Gel, wash your hands thoroughly. To open the tube, turn the screw cap counterclockwise until the safety lock is broken. After opening the tube for the first time, remove the safety ring.
Step 1 : Tilt your head back slightly (nape position) and use your free hand to gently pull down your lower eyelid.
Step 2 : Hold the tube vertically, with the opening facing down, above the eye. Press lightly on the tube until a small drop forms at the tip. Apply the drop to the conjunctival sac of the affected eye, avoiding touching the eye with the tip of the tube.
Step 3 : Close your eyes two or three times, so as to evenly distribute the gel on the surface of the eye. After use, close the tube with the protective cap, taking care not to touch anything with the tip (not even your finger). Avoid squeezing or rolling the tube, so as not to damage it.
Apply Visco-Vision Gel as needed or as directed by your ophthalmologist. In general, for adults and children, we recommend applying 1 drop 3-4 times a day. Visco-Vision® Gel is suitable for long-term use. However, as with all other diseases, if the symptoms persist, you should consult an ophthalmologist. In case of additional local eye treatment, wait approximately 30 minutes between the two applications. Visco-Vision Gel should be applied after the other products.
Components
Carbomer 980 (0.2%), sorbitol, sodium hydroxide, disodium edate, cetrimide (0.01%) and purified water.
Warnings
-Do not use the product if the tube or safety cap are damaged.
-Do not touch the eye with the tip of the tube, to avoid infection or injury to the eye.
-The tip of the tube must not come into contact with other objects or parts of the body, in order to avoid bacterial contamination of the gel.
-Remove contact lenses before use and reinsert them only after waiting at least 30 minutes.
-Do not use Visco-Vision Gel after the expiry date, which is indicated on the fold of the tube and on the packaging.
-For hygiene reasons, the same tube of Visco-Vision Gel should not be used by more than one patient.
-If eye problems persist during the use of Visco-Vision® Gel or recur after discontinuation, consult your ophthalmologist.
-Visco-Vision Gel is not suitable as the sole treatment for an eye infection. If you suspect an eye infection, contact your eye doctor.
-Do not use in case of known hypersensitivity (allergy) to any of the components.
-Suitable for use by children and adults aged 18 and over.
-No clinical data are available for pregnant or breastfeeding women and children under 18 years of age. These groups of patients should consult their doctor before using Visco-Vision Gel.
-Keep Visco-Vision Gel out of the reach of children.
-For external use only.
Side effects :
-After use, a temporary worsening of visual acuity (blurred vision) may occur. In this case, avoid driving vehicles and operating machinery. It is advisable to wait until normal visual acuity is recovered.
-Symptoms such as a slight and temporary burning sensation in the eyes or sticky eyelids may occur immediately after application.
Conservation
Store at temperatures between 5°C and 25°C.
Protect from frost and direct sunlight.
Format
Eye gel in single tubes of 10 g.
Cod. MD1
hypotonic and viscous wetting gel with 0.2% Carbomer 980. Visco-Vision Gel shows excellent mucoadhesive properties. Thanks to its wetting effect, it acts uniformly on the surface of the cornea and conjunctiva ensuring beneficial and prolonged hydration of the eye.
It can be used for the following indications:
-dry eyes caused by Sjögren's syndrome;
-mechanical stress, e.g. following diagnostic procedures on the eye;
-environmental stress, e.g. due to air-conditioned rooms, wind, cold, dry air or air containing harmful substances, such as cigarette smoke;
-tiredness and visual stress due to intense use of the eyes, e.g. from computer or microscope work or long periods of driving.
How to use
Before using Visco-Vision Gel, wash your hands thoroughly. To open the tube, turn the screw cap counterclockwise until the safety lock is broken. After opening the tube for the first time, remove the safety ring.
Step 1 : Tilt your head back slightly (nape position) and use your free hand to gently pull down your lower eyelid.
Step 2 : Hold the tube vertically, with the opening facing down, above the eye. Press lightly on the tube until a small drop forms at the tip. Apply the drop to the conjunctival sac of the affected eye, avoiding touching the eye with the tip of the tube.
Step 3 : Close your eyes two or three times, so as to evenly distribute the gel on the surface of the eye. After use, close the tube with the protective cap, taking care not to touch anything with the tip (not even your finger). Avoid squeezing or rolling the tube, so as not to damage it.
Apply Visco-Vision Gel as needed or as directed by your ophthalmologist. In general, for adults and children, we recommend applying 1 drop 3-4 times a day. Visco-Vision® Gel is suitable for long-term use. However, as with all other diseases, if the symptoms persist, you should consult an ophthalmologist. In case of additional local eye treatment, wait approximately 30 minutes between the two applications. Visco-Vision Gel should be applied after the other products.
Components
Carbomer 980 (0.2%), sorbitol, sodium hydroxide, disodium edate, cetrimide (0.01%) and purified water.
Warnings
-Do not use the product if the tube or safety cap are damaged.
-Do not touch the eye with the tip of the tube, to avoid infection or injury to the eye.
-The tip of the tube must not come into contact with other objects or parts of the body, in order to avoid bacterial contamination of the gel.
-Remove contact lenses before use and reinsert them only after waiting at least 30 minutes.
-Do not use Visco-Vision Gel after the expiry date, which is indicated on the fold of the tube and on the packaging.
-For hygiene reasons, the same tube of Visco-Vision Gel should not be used by more than one patient.
-If eye problems persist during the use of Visco-Vision® Gel or recur after discontinuation, consult your ophthalmologist.
-Visco-Vision Gel is not suitable as the sole treatment for an eye infection. If you suspect an eye infection, contact your eye doctor.
-Do not use in case of known hypersensitivity (allergy) to any of the components.
-Suitable for use by children and adults aged 18 and over.
-No clinical data are available for pregnant or breastfeeding women and children under 18 years of age. These groups of patients should consult their doctor before using Visco-Vision Gel.
-Keep Visco-Vision Gel out of the reach of children.
-For external use only.
Side effects :
-After use, a temporary worsening of visual acuity (blurred vision) may occur. In this case, avoid driving vehicles and operating machinery. It is advisable to wait until normal visual acuity is recovered.
-Symptoms such as a slight and temporary burning sensation in the eyes or sticky eyelids may occur immediately after application.
Conservation
Store at temperatures between 5°C and 25°C.
Protect from frost and direct sunlight.
Format
Eye gel in single tubes of 10 g.
Cod. MD1
