Description
Dr. GIBAUD
ORTHOGenugib 40 - Knee Brace
Indicated in cases of medium severity knee sprain, severe knee sprain, re-education-rehabilitation phase, chronic instability.
Contraindicated in cases of trauma requiring immobilization with plaster, resin or surgery.
Adjustable polycentric articulated knee orthosis.
Rigid upper and lower flanges, adjustable according to the morphology of the lower limb.
Rigid side struts to ensure lateral stability.
Non-slip padding.
Polycentric joints with the function of limiting the antero-posterior drawer.
Locking and regulation of the joint by width sectors depending on the severity or evolutionary stage of the pathology.
Rotation limitation by means of a silicone shape positioned at the tibial tuberosity.
Removable condylar pads made of high-resistance foam.
Adjustable upper and lower fastening straps.
How to use
A preliminary trial is necessary for correct adaptation and a good understanding of the positioning of the orthosis.
The joints must be strictly adjusted before placing the brace.
To change the setting, unscrew the transparent cover with a coin (1, 2 or 5 cents) and place the four pins in the holes located at the corners chosen according to the instructions provided by the prescribing doctor.
Insert the orthosis with the logo right side up.
Leave the straps in the buckles loosened to facilitate positioning of the knee brace.
The orthosis can be worn in direct contact with the skin or over trousers.
If necessary, adjust the upper and lower flanges with the Velcro strap until the joints are parallel and centered on the knee.
The two side cushions are removable and can be removed in case of discomfort.
Next, adjust the upper and lower straps first, and then the middle straps.
The intermediate strap is equipped with a silicone stabilizing element that must be positioned on the tibial crest.
Finish adjusting the straps to achieve strong, comfortable support.
The joints should be parallel and centered at the knee.
Components
Outer: 100% polyamide.
Padding: 100% polyester.
Interior: 80% cotton - 20% polyamide.
Warnings
To ensure a longer product life, it is advisable to follow the following washing instructions:
• Remove the side joints.
• Wash the flanges by hand in water at 30°C with neutral soap or detergent.
• Rinse thoroughly.
• Do not wring.
• Leave to dry horizontally.
• Do not iron.
Format
Pack of 1 piece.
Size: One size.
Height: 40 cm
Cod. 5G0522X00BA00
Contraindicated in cases of trauma requiring immobilization with plaster, resin or surgery.
Adjustable polycentric articulated knee orthosis.
Rigid upper and lower flanges, adjustable according to the morphology of the lower limb.
Rigid side struts to ensure lateral stability.
Non-slip padding.
Polycentric joints with the function of limiting the antero-posterior drawer.
Locking and regulation of the joint by width sectors depending on the severity or evolutionary stage of the pathology.
Rotation limitation by means of a silicone shape positioned at the tibial tuberosity.
Removable condylar pads made of high-resistance foam.
Adjustable upper and lower fastening straps.
How to use
A preliminary trial is necessary for correct adaptation and a good understanding of the positioning of the orthosis.
The joints must be strictly adjusted before placing the brace.
To change the setting, unscrew the transparent cover with a coin (1, 2 or 5 cents) and place the four pins in the holes located at the corners chosen according to the instructions provided by the prescribing doctor.
Insert the orthosis with the logo right side up.
Leave the straps in the buckles loosened to facilitate positioning of the knee brace.
The orthosis can be worn in direct contact with the skin or over trousers.
If necessary, adjust the upper and lower flanges with the Velcro strap until the joints are parallel and centered on the knee.
The two side cushions are removable and can be removed in case of discomfort.
Next, adjust the upper and lower straps first, and then the middle straps.
The intermediate strap is equipped with a silicone stabilizing element that must be positioned on the tibial crest.
Finish adjusting the straps to achieve strong, comfortable support.
The joints should be parallel and centered at the knee.
Components
Outer: 100% polyamide.
Padding: 100% polyester.
Interior: 80% cotton - 20% polyamide.
Warnings
To ensure a longer product life, it is advisable to follow the following washing instructions:
• Remove the side joints.
• Wash the flanges by hand in water at 30°C with neutral soap or detergent.
• Rinse thoroughly.
• Do not wring.
• Leave to dry horizontally.
• Do not iron.
Format
Pack of 1 piece.
Size: One size.
Height: 40 cm
Cod. 5G0522X00BA00
