Description
Complete set for aerosol therapy
Description
Class IIa medical device.
The aerosol therapy set is designed to treat respiratory diseases quickly and effectively.
It can be used with all compressed air aerosols.
How to use
Before using the aerosol therapy set, make sure to clean all parts of the device.
Open the nebulizer and pour in the amount of medicine prescribed by your doctor; be careful not to exceed the maximum level mark. Connect the nebulizer to the compressor via the air tube. Position the most suitable accessory for inhalation therapy: the mask, mouthpiece or nasal dispenser. Sit in a relaxed position with your upper body straight. Make sure that the air tube does not contain condensation; if so, turn on the compressor to dry out any moisture.
Once the therapy is finished, clean all parts of the set.
Cleaning and disinfection
After each treatment, thoroughly clean all parts of the set to remove any drug residue.
The air tube should be cleaned with a damp cloth.
Always wash your hands thoroughly before cleaning and disinfecting accessories.
Wash/sterilize each part of the nebulizer.
Replace the air tube when switching to a new patient or in case of impurities.
- Cleaning with water
Wash all parts of the appliance (except the air tube) under hot running water for about 5 minutes. Rinse thoroughly, taking care to remove all residues, then leave to air dry.
- Disinfection
Suitable chemical solutions can be used to disinfect all parts (except the air tube), following the manufacturer's instructions. Disinfectants are generally available at pharmacies.
- Sterilization in boiling water
All properly separated components (except the air tube and masks) can be boiled in plenty of water for no more than 1 minute.
Warnings
Strictly adhere to the intended use of the device.
The device must be cleaned before use.
Use the device with care.
The device is latex-free and phthalate-free.
If the device is not subjected to the indicated cleaning procedures before its use, infections and septicemia may occur.
Do not use the device if it has any defects or anomalies.
Keep out of reach of children.
Do not place heavy objects on the device. Do not expose the device to mechanical stress.
Before use, make sure that the device is intact and undamaged, that it has not changed color or taken on uneven colors, that there is no surface mold, etc. If any of these cases should occur, discard the device and replace it immediately.
During use, make sure the compressor is working, the air hose is properly connected at both ends and is not crushed, kinked, dirty or clogged. If necessary, replace it with a new one.
Make sure the nebulizer components are assembled correctly.
Make sure the medicine has been poured into the nebulizer.
Conservation
Store in a cool, dry place, away from heat sources and direct exposure to sunlight.
Validity with intact packaging: 36 months.
Format
The package contains:
- 1 ampoule;
- 1 adult mask;
- 1 child mask;
- 1 mouthpiece;
- 1 nasal dispenser;
- 1 tube 150 cm long.
Code FOR.002.020
Class IIa medical device.
The aerosol therapy set is designed to treat respiratory diseases quickly and effectively.
It can be used with all compressed air aerosols.
How to use
Before using the aerosol therapy set, make sure to clean all parts of the device.
Open the nebulizer and pour in the amount of medicine prescribed by your doctor; be careful not to exceed the maximum level mark. Connect the nebulizer to the compressor via the air tube. Position the most suitable accessory for inhalation therapy: the mask, mouthpiece or nasal dispenser. Sit in a relaxed position with your upper body straight. Make sure that the air tube does not contain condensation; if so, turn on the compressor to dry out any moisture.
Once the therapy is finished, clean all parts of the set.
Cleaning and disinfection
After each treatment, thoroughly clean all parts of the set to remove any drug residue.
The air tube should be cleaned with a damp cloth.
Always wash your hands thoroughly before cleaning and disinfecting accessories.
Wash/sterilize each part of the nebulizer.
Replace the air tube when switching to a new patient or in case of impurities.
- Cleaning with water
Wash all parts of the appliance (except the air tube) under hot running water for about 5 minutes. Rinse thoroughly, taking care to remove all residues, then leave to air dry.
- Disinfection
Suitable chemical solutions can be used to disinfect all parts (except the air tube), following the manufacturer's instructions. Disinfectants are generally available at pharmacies.
- Sterilization in boiling water
All properly separated components (except the air tube and masks) can be boiled in plenty of water for no more than 1 minute.
Warnings
Strictly adhere to the intended use of the device.
The device must be cleaned before use.
Use the device with care.
The device is latex-free and phthalate-free.
If the device is not subjected to the indicated cleaning procedures before its use, infections and septicemia may occur.
Do not use the device if it has any defects or anomalies.
Keep out of reach of children.
Do not place heavy objects on the device. Do not expose the device to mechanical stress.
Before use, make sure that the device is intact and undamaged, that it has not changed color or taken on uneven colors, that there is no surface mold, etc. If any of these cases should occur, discard the device and replace it immediately.
During use, make sure the compressor is working, the air hose is properly connected at both ends and is not crushed, kinked, dirty or clogged. If necessary, replace it with a new one.
Make sure the nebulizer components are assembled correctly.
Make sure the medicine has been poured into the nebulizer.
Conservation
Store in a cool, dry place, away from heat sources and direct exposure to sunlight.
Validity with intact packaging: 36 months.
Format
The package contains:
- 1 ampoule;
- 1 adult mask;
- 1 child mask;
- 1 mouthpiece;
- 1 nasal dispenser;
- 1 tube 150 cm long.
Code FOR.002.020
