Description
Manometer kit for Vitapep with fitting
Description
The manometer manometer kit for Vitapep with connector is used to measure the effort to be made during respiratory gymnastics performed with Vitapep. The positive pressure generated by the patient is measured by the manometer thus allowing the doctor to perform an appropriate sizing. The connector is used to connect the tube, connected to the manometer, to the Vitapep.
The pressure gauge shows a graduated scale divided into hPa (1 hPa is equivalent to approximately 1 cm H2O) which goes from 0 to 60 hPa.
Composition
Pressure gauge: steel.
Tube: Non-toxic PVC.
Technical features
How to use
The pressure gauge can be cleaned using any non-corrosive cleaning product.
The tube can be washed with warm water using a little non-abrasive detergent and rinsed under running water. Before being stored, the tube must be dried externally and left to drip until the inside is dry.
The tube can be immersed in a cold disinfectant solution (such as a 2% sodium hypochlorite solution), following the manufacturer's instructions.
Format
The pressure gauge kit for Vitapep with fitting consists of:
-gauge
-connecting tube
-15M/22M/5F connection.
Code 472052
The manometer manometer kit for Vitapep with connector is used to measure the effort to be made during respiratory gymnastics performed with Vitapep. The positive pressure generated by the patient is measured by the manometer thus allowing the doctor to perform an appropriate sizing. The connector is used to connect the tube, connected to the manometer, to the Vitapep.
The pressure gauge shows a graduated scale divided into hPa (1 hPa is equivalent to approximately 1 cm H2O) which goes from 0 to 60 hPa.
Composition
Pressure gauge: steel.
Tube: Non-toxic PVC.
Technical features
| Operating conditions | |
| Temperature | Min +10°C Max +40°C |
| Relative humidity | Min 30% Max 75% |
| Pressure | Min 700 hPa Max 1.060 hPa |
How to use
The pressure gauge can be cleaned using any non-corrosive cleaning product.
The tube can be washed with warm water using a little non-abrasive detergent and rinsed under running water. Before being stored, the tube must be dried externally and left to drip until the inside is dry.
The tube can be immersed in a cold disinfectant solution (such as a 2% sodium hypochlorite solution), following the manufacturer's instructions.
Format
The pressure gauge kit for Vitapep with fitting consists of:
-gauge
-connecting tube
-15M/22M/5F connection.
Code 472052
