Description
DR. BRUX
NIGHT BITE
Description
Dr. Brux is a practical self-modeling bite indicated to protect the teeth from bruxism or grinding.
Anatomical shape for high comfort thanks to a special thermoplastic material with two different hardnesses. The first, the lateral wall, to provide stability and comfort, the second, occlusal plane, to create a support surface that facilitates the sliding of the teeth during grinding and makes the bite resistant to wear.
Made of thermo-moldable material. Immerse Dr.Brux in boiling water for a few seconds and insert it into the mouth, you get a bite that adapts to the teeth, thus obtaining great stability and high comfort. Thanks to the "calibrated" occlusal thicknesses that help bring the jaw into a resting position, the relaxation of the muscle bands is facilitated. The thickness of the bite creates an elongation of the muscles and therefore a reduction in the forces exerted by the masticatory muscles.
Hygienic and colorful, it comes with a protective case and is made in four different colors to be easily recognized in the context of a family unit.
How to use
The adaptation must take place on the teeth of the upper arch.
Hold the “Cross-Shaped System” adaptation device and insert it into the Dr. Brux Bite. Before proceeding with customization, try inserting the bite into your mouth, to become familiar with the subsequent maneuvers.
In a saucepan, bring about 500 ml of water to the boil: it is necessary to reach a temperature of 100°C (do not use the microwave to boil water). Remove the saucepan from the heat or electric hob. Holding the personalization device as illustrated, completely immerse the bite in the boiling water (100°C) for 6 seconds (using a stopwatch). Remove the bite and shake it vigorously to eliminate any residual water. This will make the bite warm, but not burn.
Slightly widen the walls of the bite to facilitate insertion onto the teeth. Caution: avoid the walls from bending inwards and being bitten. Insert the bite into the mouth, closing the teeth without squeezing too much, keeping the adaptation device inserted. With the lips closed, inhale air and suck firmly for at least one minute, in order to eliminate the air inside the mouth. By doing so, a "vacuum" will be created and the walls of the bite will adhere perfectly to the external and internal surfaces of the teeth, thus obtaining an optimal conformation of the bite. At the same time, press the fingers against the cheeks to make the external part of the bite adhere to the teeth. After about a minute, remove the bite from the mouth and immerse it in cold water for at least 2 minutes. At this point, remove the adaptation device and the bite will be ready for use.
If Dr. Brux is not very stable, repeat the customization operations, paying more attention. In order to improve the customization, if the modeling has not been done precisely in all parts of the bite, it is recommended to repeat the operation by immersing the bite only in the affected portion using one of the 4 attachment points of the adaptation device.
Do not throw away the adaptation device because, if the dental situation changes, it will be possible to reshape the bite.
If, after customization, there are burrs or creases in the material, remove them using small scissors or a cutter.
If Dr. Brux is too long, shorten it near the pre-cut using scissors or a cutter.
After use, before putting the bite back in the case, wash it with a toothbrush under cold water. For proper hygiene and cleaning of Dr. Brux, it is recommended to perform a complete disinfection weekly, to avoid bacterial growth caused by dental plaque.
Warnings
The use of the Bite is recommended in the presence of permanent teeth.
In case of marked dental or gum dysfunction, in the presence of orthodontic appliances, fixed or removable, or removable prostheses, ask your dentist for advice before using Dr. Brux.
Do not reshape the bite more than 10 times.
Do not use the microwave to heat water.
Never wash the bite with boiling water.
Avoid storing the bite near heat sources.
Do not use the bite with the customization device inserted.
Conservation
Store at room temperature.
Validity with intact packaging: 60 months.
Format
Pack of 1 piece
Code 13215
Dr. Brux is a practical self-modeling bite indicated to protect the teeth from bruxism or grinding.
Anatomical shape for high comfort thanks to a special thermoplastic material with two different hardnesses. The first, the lateral wall, to provide stability and comfort, the second, occlusal plane, to create a support surface that facilitates the sliding of the teeth during grinding and makes the bite resistant to wear.
Made of thermo-moldable material. Immerse Dr.Brux in boiling water for a few seconds and insert it into the mouth, you get a bite that adapts to the teeth, thus obtaining great stability and high comfort. Thanks to the "calibrated" occlusal thicknesses that help bring the jaw into a resting position, the relaxation of the muscle bands is facilitated. The thickness of the bite creates an elongation of the muscles and therefore a reduction in the forces exerted by the masticatory muscles.
Hygienic and colorful, it comes with a protective case and is made in four different colors to be easily recognized in the context of a family unit.
How to use
The adaptation must take place on the teeth of the upper arch.
Hold the “Cross-Shaped System” adaptation device and insert it into the Dr. Brux Bite. Before proceeding with customization, try inserting the bite into your mouth, to become familiar with the subsequent maneuvers.
In a saucepan, bring about 500 ml of water to the boil: it is necessary to reach a temperature of 100°C (do not use the microwave to boil water). Remove the saucepan from the heat or electric hob. Holding the personalization device as illustrated, completely immerse the bite in the boiling water (100°C) for 6 seconds (using a stopwatch). Remove the bite and shake it vigorously to eliminate any residual water. This will make the bite warm, but not burn.
Slightly widen the walls of the bite to facilitate insertion onto the teeth. Caution: avoid the walls from bending inwards and being bitten. Insert the bite into the mouth, closing the teeth without squeezing too much, keeping the adaptation device inserted. With the lips closed, inhale air and suck firmly for at least one minute, in order to eliminate the air inside the mouth. By doing so, a "vacuum" will be created and the walls of the bite will adhere perfectly to the external and internal surfaces of the teeth, thus obtaining an optimal conformation of the bite. At the same time, press the fingers against the cheeks to make the external part of the bite adhere to the teeth. After about a minute, remove the bite from the mouth and immerse it in cold water for at least 2 minutes. At this point, remove the adaptation device and the bite will be ready for use.
If Dr. Brux is not very stable, repeat the customization operations, paying more attention. In order to improve the customization, if the modeling has not been done precisely in all parts of the bite, it is recommended to repeat the operation by immersing the bite only in the affected portion using one of the 4 attachment points of the adaptation device.
Do not throw away the adaptation device because, if the dental situation changes, it will be possible to reshape the bite.
If, after customization, there are burrs or creases in the material, remove them using small scissors or a cutter.
If Dr. Brux is too long, shorten it near the pre-cut using scissors or a cutter.
After use, before putting the bite back in the case, wash it with a toothbrush under cold water. For proper hygiene and cleaning of Dr. Brux, it is recommended to perform a complete disinfection weekly, to avoid bacterial growth caused by dental plaque.
Warnings
The use of the Bite is recommended in the presence of permanent teeth.
In case of marked dental or gum dysfunction, in the presence of orthodontic appliances, fixed or removable, or removable prostheses, ask your dentist for advice before using Dr. Brux.
Do not reshape the bite more than 10 times.
Do not use the microwave to heat water.
Never wash the bite with boiling water.
Avoid storing the bite near heat sources.
Do not use the bite with the customization device inserted.
Conservation
Store at room temperature.
Validity with intact packaging: 60 months.
Format
Pack of 1 piece
Code 13215
