Description
COFFEE
ALCOSPRAY
Description
Multipurpose hydroalcoholic solution, suitable for food use and for sanitizing disposable individual protective masks in the event of a health emergency from Coronavirus COVID-19. Contains 75% alcohol by volume.
How to use
1. Wash your hands thoroughly with soap for at least 40 seconds.
2. Remove the mask worn on the face using the elastic bands and trying to avoid touching the inside.
3. Wash your hands again following the instructions in point 1, put on a new pair of disposable gloves or alternatively sanitize your hands with a 75%-85% hydroalcoholic solution or other suitable disinfectant.
4. Place the mask on a surface previously cleaned/sanitized with soap and water or hydroalcoholic solution >70% or other suitable disinfectant, with the external part facing upwards.
5. Spray the hydroalcoholic solution >70% evenly over the entire surface including the elastics but without over-wetting; it is sufficient to spray a uniform layer over the entire surface.
6. Turn the mask over and repeat the operation.
7. Leave the solution to act until it has completely evaporated in a protected place (at least 30 minutes, drying time may vary depending on environmental conditions).
8. After drying, after the aforementioned time, the mask is sanitized, therefore avoid contaminating it, especially on the inside. If the smell of alcohol persists, it is advisable to let it dry further on a clean and sanitized surface, otherwise place the mask in a plastic bag until the next use.
Components
Neutral ethyl alcohol, demineralized water.
Warnings
Do not smoke. Highly flammable. Do not store the sanitized mask inside or on unsanitized surfaces without the protection of the plastic bag. Do not use the reconditioned mask in case of obvious alterations. The inside of the mask must not be touched for any reason as there could be a risk of contamination that would favor contagion.
Conservation
Keep container tightly closed.
Keep away from flames and sparks.
Format
50 ml bottle.
Code 102/A
Multipurpose hydroalcoholic solution, suitable for food use and for sanitizing disposable individual protective masks in the event of a health emergency from Coronavirus COVID-19. Contains 75% alcohol by volume.
How to use
1. Wash your hands thoroughly with soap for at least 40 seconds.
2. Remove the mask worn on the face using the elastic bands and trying to avoid touching the inside.
3. Wash your hands again following the instructions in point 1, put on a new pair of disposable gloves or alternatively sanitize your hands with a 75%-85% hydroalcoholic solution or other suitable disinfectant.
4. Place the mask on a surface previously cleaned/sanitized with soap and water or hydroalcoholic solution >70% or other suitable disinfectant, with the external part facing upwards.
5. Spray the hydroalcoholic solution >70% evenly over the entire surface including the elastics but without over-wetting; it is sufficient to spray a uniform layer over the entire surface.
6. Turn the mask over and repeat the operation.
7. Leave the solution to act until it has completely evaporated in a protected place (at least 30 minutes, drying time may vary depending on environmental conditions).
8. After drying, after the aforementioned time, the mask is sanitized, therefore avoid contaminating it, especially on the inside. If the smell of alcohol persists, it is advisable to let it dry further on a clean and sanitized surface, otherwise place the mask in a plastic bag until the next use.
Components
Neutral ethyl alcohol, demineralized water.
Warnings
Do not smoke. Highly flammable. Do not store the sanitized mask inside or on unsanitized surfaces without the protection of the plastic bag. Do not use the reconditioned mask in case of obvious alterations. The inside of the mask must not be touched for any reason as there could be a risk of contamination that would favor contagion.
Conservation
Keep container tightly closed.
Keep away from flames and sparks.
Format
50 ml bottle.
Code 102/A
