Description
BIOLINK
INFUSION SET
Description
The sterile disposable infusion set "BL-DEFLL" is classified as a Class IIa medical device.
Disposable infusion sets are used for the administration of intravenous solutions into the circulatory system (infusion) through peripheral veins, and are suitable for gravity-fed infusions. They are intended for short-term use.
How to use
A. Infusion set with integrated air intake
1. Close flow regulator.
2. Remove the protective cap from the tip and insert the tip into the container of the infusion solution along its entire length.
3. Press the drip chamber and adjust the fluid level.
4. Remove the protective cap from the intravenous needle or distal luer/luer lock connector and open the flow regulator. Expel air from the PVC tubing and close the regulator.
5. Insert the needle into the vein or connect the infusion set to an intravenous catheter and adjust the flow rate using the regulator. 20 drops make 1 ml ± 0.1 ml.
6. On collapsible containers of infusion solution, leave the air inlet closed.
B. Infusion set with separate air inlet device for use with rigid glass containers/bottles
1. Close the flow regulator.
2. Remove the protective cap from the metal needle of the set and insert it into the container of the infusion solution along its entire length.
3. Remove the protective cap from the needle of the air delivery device and insert it into the container of infusion solution along its entire length.
4. Tighten the drip chamber and adjust the fluid level.
5. Remove the protective cap from the intravenous needle and open the flow regulator. Expel the air from the PVC tube and close the regulator.
6. Insert the needle into the vein and adjust the flow rate using the regulator. 20 drops make 1 ml ± 0.1 ml.
Warnings
The sterile infusion set is a disposable medical device, therefore not reusable. Any reuse or resterilization may cause harm to patients.
1. This product is sterilized by ethylene oxide.
2. Before use, check the integrity of the individual packaging: in case of leaks, damage and/or the protective cap falling, do not use the medical device.
3. The application and removal of the drip must be performed by professional nursing personnel.
4. The luer lock connector shall comply with ISO 80369-7:2016.
5. The needle shall comply with ISO 7864:2016.
Do not use the medical device to perform a transfusion of blood or blood components.
Do not use the medical device to administer highly viscous fluids and lipids.
Do not use the medical device for the infusion of fat-soluble liquids and medicines, such as full-fat milk.
Do not use the medical device for the infusion of medicinal products incompatible with PVC - consult the product information accompanying the medicinal product.
Do not use the medical device for the infusion of photosensitive drugs.
Do not use the medical device with pressurized infusion equipment (e.g. infusion pumps).
Conservation
Store in clean, dry conditions, in the original packaging and away from direct sunlight, sources of high temperatures, and solvent vapors.
Validity of intact packaging: 5 years.
Replace product if damaged, contaminated or in accordance with local work practices and legislation.
Format
1 piece.
Cod. BL-DEFLL
The sterile disposable infusion set "BL-DEFLL" is classified as a Class IIa medical device.
Disposable infusion sets are used for the administration of intravenous solutions into the circulatory system (infusion) through peripheral veins, and are suitable for gravity-fed infusions. They are intended for short-term use.
How to use
A. Infusion set with integrated air intake
1. Close flow regulator.
2. Remove the protective cap from the tip and insert the tip into the container of the infusion solution along its entire length.
3. Press the drip chamber and adjust the fluid level.
4. Remove the protective cap from the intravenous needle or distal luer/luer lock connector and open the flow regulator. Expel air from the PVC tubing and close the regulator.
5. Insert the needle into the vein or connect the infusion set to an intravenous catheter and adjust the flow rate using the regulator. 20 drops make 1 ml ± 0.1 ml.
6. On collapsible containers of infusion solution, leave the air inlet closed.
B. Infusion set with separate air inlet device for use with rigid glass containers/bottles
1. Close the flow regulator.
2. Remove the protective cap from the metal needle of the set and insert it into the container of the infusion solution along its entire length.
3. Remove the protective cap from the needle of the air delivery device and insert it into the container of infusion solution along its entire length.
4. Tighten the drip chamber and adjust the fluid level.
5. Remove the protective cap from the intravenous needle and open the flow regulator. Expel the air from the PVC tube and close the regulator.
6. Insert the needle into the vein and adjust the flow rate using the regulator. 20 drops make 1 ml ± 0.1 ml.
Warnings
The sterile infusion set is a disposable medical device, therefore not reusable. Any reuse or resterilization may cause harm to patients.
1. This product is sterilized by ethylene oxide.
2. Before use, check the integrity of the individual packaging: in case of leaks, damage and/or the protective cap falling, do not use the medical device.
3. The application and removal of the drip must be performed by professional nursing personnel.
4. The luer lock connector shall comply with ISO 80369-7:2016.
5. The needle shall comply with ISO 7864:2016.
Do not use the medical device to perform a transfusion of blood or blood components.
Do not use the medical device to administer highly viscous fluids and lipids.
Do not use the medical device for the infusion of fat-soluble liquids and medicines, such as full-fat milk.
Do not use the medical device for the infusion of medicinal products incompatible with PVC - consult the product information accompanying the medicinal product.
Do not use the medical device for the infusion of photosensitive drugs.
Do not use the medical device with pressurized infusion equipment (e.g. infusion pumps).
Conservation
Store in clean, dry conditions, in the original packaging and away from direct sunlight, sources of high temperatures, and solvent vapors.
Validity of intact packaging: 5 years.
Replace product if damaged, contaminated or in accordance with local work practices and legislation.
Format
1 piece.
Cod. BL-DEFLL