Description
FFP2 RESPIRATOR
DISPOSABLE
Description
Personal protective equipment class FFP2 NR category III.
PPE should be used to protect the respiratory tract from droplets and non-oily particles, oily particles and dust.
With hooks to make the mask fit better on small faces.
The mask features an adjustable nose bridge.
Bacterial filtration efficiency: ≥95%.
Standard EN 149:2001+A1:2009.
How to use
Open the device using both hands, making sure the bridge is on the outer side at the top. Place the mask over your nose and mouth, position it under your chin with the nose bridge facing upwards. Bring both elastic bands behind your ears. The device can also be worn using the adapter hook recommended for smaller facial and skull shapes. Insert one of the elastic bands into the most closed end of the hook and bring the device to your face, hook the other elastic band to the most open end of the hook that will be positioned behind your neck. Using your fingertips, make the nose piece adhere to the nasal septum by pushing from the outside to the inside. During this phase of testing the mask, the user may experience a reduced oxygen flow. Before entering the work area, perform breathing tests to check for leaks or drafts in the mask. Place both hands on the mask and inhale deeply, being careful not to change the position of the mask. If the user experiences negative pressure inside the mask, this is normal. If the user feels air leaks around the nose, reposition the mask. If there are no leaks or oxygen leaks, then the user can proceed to enter the contaminated area.
Components
5-layer mask:
- 1st layer: 30 g/ m2 non-woven fabric;
- 2nd and 3rd layer: double filter layer with melt-blown technology 25 g/m2 each ;
- 4th layer: hot air cotton 25 g/ m2 ;
- 5th layer: 50 g/ m2 non-woven fabric.
Warnings
Single use: not reusable.
Conservation
Store the device in a cool place, away from heat sources, open flames, direct sunlight and atmospheric agents.
Validity with intact packaging: 24 months.
Format
Pack of 5 bags of 5 pieces
Code MM-1
Personal protective equipment class FFP2 NR category III.
PPE should be used to protect the respiratory tract from droplets and non-oily particles, oily particles and dust.
With hooks to make the mask fit better on small faces.
The mask features an adjustable nose bridge.
Bacterial filtration efficiency: ≥95%.
Standard EN 149:2001+A1:2009.
How to use
Open the device using both hands, making sure the bridge is on the outer side at the top. Place the mask over your nose and mouth, position it under your chin with the nose bridge facing upwards. Bring both elastic bands behind your ears. The device can also be worn using the adapter hook recommended for smaller facial and skull shapes. Insert one of the elastic bands into the most closed end of the hook and bring the device to your face, hook the other elastic band to the most open end of the hook that will be positioned behind your neck. Using your fingertips, make the nose piece adhere to the nasal septum by pushing from the outside to the inside. During this phase of testing the mask, the user may experience a reduced oxygen flow. Before entering the work area, perform breathing tests to check for leaks or drafts in the mask. Place both hands on the mask and inhale deeply, being careful not to change the position of the mask. If the user experiences negative pressure inside the mask, this is normal. If the user feels air leaks around the nose, reposition the mask. If there are no leaks or oxygen leaks, then the user can proceed to enter the contaminated area.
Components
5-layer mask:
- 1st layer: 30 g/ m2 non-woven fabric;
- 2nd and 3rd layer: double filter layer with melt-blown technology 25 g/m2 each ;
- 4th layer: hot air cotton 25 g/ m2 ;
- 5th layer: 50 g/ m2 non-woven fabric.
Warnings
Single use: not reusable.
Conservation
Store the device in a cool place, away from heat sources, open flames, direct sunlight and atmospheric agents.
Validity with intact packaging: 24 months.
Format
Pack of 5 bags of 5 pieces
Code MM-1
