Description
RINOWASH SPARE PARTS KIT
Description
Spare parts kit for the Rinowash upper airway treatment device.
How to use
Cleaning : Rinowash dismantled into its components can be washed with hot water (about 40°C) using detergent (dosed according to the detergent manufacturer's instructions) and rinsed under running water. When all the parts have been cleaned they can be dried with a soft cloth and put away.
Disinfection : all components of the Rinowash nasal shower, after being washed, can be immersed in a cold disinfectant solution (such as a solution with a sodium hypochlorite concentration not exceeding 2%), following the instructions given by the manufacturer.
It is possible to disinfect all the components of the nasal shower by boiling them in water for a maximum of 10 minutes: the components must not be in direct contact with the bottom of the pan.
The boiling cycle may alter the color or aesthetics of the components; this does not affect the operation of the device.
Sterilization : all components of the Rinowash nasal shower are compatible with the autoclave sterilization cycle at 121°C for at least 15 minutes (maximum 30 minutes) for a maximum of 20 cycles.
Composition
Atomizer: polycarbonate.
Outer bell: polycarbonate and silicone.
Sealing gasket: silicone.
All materials used do not contain phthalates and the presence of natural latex is not detected.
Warnings
This spare parts kit can only be used with the Rinowash device.
Please refer to the instructions for use of the Rinowash device.
Conservation
Store the product at a temperature between -25°C and +50°C and at a humidity between 30% and 90%.
Format
The package contains:
- 1 atomizer
- 1 external bell
- 1 sealing gasket.
Code 471232
Spare parts kit for the Rinowash upper airway treatment device.
How to use
Cleaning : Rinowash dismantled into its components can be washed with hot water (about 40°C) using detergent (dosed according to the detergent manufacturer's instructions) and rinsed under running water. When all the parts have been cleaned they can be dried with a soft cloth and put away.
Disinfection : all components of the Rinowash nasal shower, after being washed, can be immersed in a cold disinfectant solution (such as a solution with a sodium hypochlorite concentration not exceeding 2%), following the instructions given by the manufacturer.
It is possible to disinfect all the components of the nasal shower by boiling them in water for a maximum of 10 minutes: the components must not be in direct contact with the bottom of the pan.
The boiling cycle may alter the color or aesthetics of the components; this does not affect the operation of the device.
Sterilization : all components of the Rinowash nasal shower are compatible with the autoclave sterilization cycle at 121°C for at least 15 minutes (maximum 30 minutes) for a maximum of 20 cycles.
Composition
Atomizer: polycarbonate.
Outer bell: polycarbonate and silicone.
Sealing gasket: silicone.
All materials used do not contain phthalates and the presence of natural latex is not detected.
Warnings
This spare parts kit can only be used with the Rinowash device.
Please refer to the instructions for use of the Rinowash device.
Conservation
Store the product at a temperature between -25°C and +50°C and at a humidity between 30% and 90%.
Format
The package contains:
- 1 atomizer
- 1 external bell
- 1 sealing gasket.
Code 471232
