Description
Dr. GIBAUD
ORTHOGenugib - Knee Brace
Medical device indicated for medium-serious knee sprains, severe knee sprains, relative or sector-specific post-operative immobilization, re-education-rehabilitation phase.
Characteristics:
• Adjustable polycentric articulated knee orthosis.
• Rigid upper and lower flanges, adjustable according to the morphology of the lower limb.
• Rigid side uprights to ensure lateral stability.
• Non-slip padding.
• Polycentric joints with the function of limiting the antero-posterior drawer.
• Locking and adjustment of the joint by width sectors depending on the severity or evolutionary stage of the pathology.
• Rotation limitation by means of a silicone shape positioned in correspondence with the tibial tuberosity.
• Removable condylar pads made of high-resistance foam.
• Adjustable upper and lower fastening straps.
How to use
The joints must be adjusted before positioning the brace. To change the adjustment, unscrew the transparent cover with a coin (1, 2 or 5 cents) and place the four pins in the holes located at the corners chosen according to the instructions provided by the prescribing doctor. Insert the orthosis with the Giabaud logo right. Leave the straps in the buckles, loosening them to facilitate positioning of the knee brace. The orthosis can be worn in direct contact with the skin or over trousers.
• If necessary, adjust the upper and lower flanges with the Velcro fastening until the joints are parallel and centered on the knee.
• The two side cushions are removable and can be removed in case of discomfort.
• Next, first adjust the upper and lower straps and then the middle straps. The middle strap is equipped with a silicone stabilizing element that must be positioned on the tibial crest.
• Finish adjusting the straps to achieve strong, comfortable support. The joints should be parallel and centered over the knee.
Components
Outer: 100% polyamide.
Padding: 100% polyester.
Interior: 80% cotton, 20% polyamide.
Warnings
To ensure a longer product life, it is advisable to follow the following washing instructions:
• Remove the side joints.
• Wash the flanges by hand in water at 30° C with neutral soap or detergent.
• Rinse thoroughly.
• Do not wring.
• Leave to dry horizontally.
• Do not iron.
Format
One size fits all. 50cm tall.
Cod. 5G0521X00BA00
Characteristics:
• Adjustable polycentric articulated knee orthosis.
• Rigid upper and lower flanges, adjustable according to the morphology of the lower limb.
• Rigid side uprights to ensure lateral stability.
• Non-slip padding.
• Polycentric joints with the function of limiting the antero-posterior drawer.
• Locking and adjustment of the joint by width sectors depending on the severity or evolutionary stage of the pathology.
• Rotation limitation by means of a silicone shape positioned in correspondence with the tibial tuberosity.
• Removable condylar pads made of high-resistance foam.
• Adjustable upper and lower fastening straps.
How to use
The joints must be adjusted before positioning the brace. To change the adjustment, unscrew the transparent cover with a coin (1, 2 or 5 cents) and place the four pins in the holes located at the corners chosen according to the instructions provided by the prescribing doctor. Insert the orthosis with the Giabaud logo right. Leave the straps in the buckles, loosening them to facilitate positioning of the knee brace. The orthosis can be worn in direct contact with the skin or over trousers.
• If necessary, adjust the upper and lower flanges with the Velcro fastening until the joints are parallel and centered on the knee.
• The two side cushions are removable and can be removed in case of discomfort.
• Next, first adjust the upper and lower straps and then the middle straps. The middle strap is equipped with a silicone stabilizing element that must be positioned on the tibial crest.
• Finish adjusting the straps to achieve strong, comfortable support. The joints should be parallel and centered over the knee.
Components
Outer: 100% polyamide.
Padding: 100% polyester.
Interior: 80% cotton, 20% polyamide.
Warnings
To ensure a longer product life, it is advisable to follow the following washing instructions:
• Remove the side joints.
• Wash the flanges by hand in water at 30° C with neutral soap or detergent.
• Rinse thoroughly.
• Do not wring.
• Leave to dry horizontally.
• Do not iron.
Format
One size fits all. 50cm tall.
Cod. 5G0521X00BA00
